Dynex DX-40L150A11 User's Guide download pdf (Page 12)

Making connections

DX-40L150A11

Connecting an HDMI device

Note: If your device has an HDMI connection, we recommend you use that

to get the best quality possible.

To connect an HDMI device:

• Connect one end of an HDMI cable (not included) to an HDMI jack

on the back of your TV, or an HDMI jack on the side of your TV,

then connect the other end of the cable to the HDMI OUT jack on

the HDMI device.

Note: To connect a DVI device, use a DVI to HDMI adapter cable to connect

to the HDMI1 jack on the back of the TV, then connect an audio cable

to the PC/DVIAUDIO IN jack on the back of the TV.

To play from the HDMI device:

1 Turn on the TV, then press INPUT. The INPUT SOURCE menu

opens.

2 Press or to select HDMI 1 to HDMI 4, then press ENTER.

Note: You can also press HDMI repeatedly to select HDMI 1 to HDMI 4.

3 Turn on the HDMI device, then set it to the correct mode. Refer to

the instructions that came with the HDMI device.

Connecting a component video device

Component cables often have red, green, and blue color-coded video

connectors and red and white audio connectors. Match the colors when

making connections.

To connect a component video device:

1 Make sure that your TV’s power cord is unplugged and the

component video device is turned off.

2 Connect a component video cable to the COMPONENT OUT jacks

on the component video device.

3 Connect the other end of the component video cable to the

COMPONENT Y/P

B/PR jacks on the back of your TV.

4 Connect an audio cable (not included) to the AUDIO OUT jacks

(L/R) on the component device.

5 Connect the other end of the audio cable to the

COMPONENTAUDIO-R and AUDIO-L jacks on the back of

your TV.

To play from the component video device:

1 Turn on the TV, then press INPUT. The INPUT SOURCE menu

opens.

2 Press or to select Component 1 or Component 2, then

press ENTER.

Note: You can also press COMP once to select Component 1 or twice to

select Component 2.

3 Turn on the component video device and start playback. Refer to

the instructions that came with the component video device.

Connecting an antenna, cable TV, or

satellite TV box

If you are connecting a satellite TV or cable box, you can use one of the

following (if available):

•Best - HDMI cable

• Better - Video component cables

•Better - S-Video cable

• Good - Video composite cable

• Acceptable - 75-ohm coaxial cable.

To connect an antenna, cable TV, or satellite TV box:

• Connect one end of a 75-Ohm, coaxial cable to the ANT/CABLE

IN jack on the back of the TV, then connect the other end of the

cable to the antenna or cable TV wall jack.

Notes:

• We recommend using a 75-Ohm, coaxial cable to reduce interference

and noise that may be caused by radio wave transmissions.

• Do not bundle the coaxial cable with the power cord or any other

cables.

• If you are using an antenna and reception is not good, contact a

service technician to adjust the antenna.

Back of TV

HDMI device

HDMI cable

Back of TV

Component video device

Component

video cable

Audio cable

75-Ohm coaxial cable

Wall jack

Back of TV

Cable box or satellite receiver

HDMI cable

Video or S-Video

cable

Component cable

DX-40L150A11_10-0017.book Page 9 Tuesday, February 16, 2010 4:15 PM

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comments to this Manuals

No comments

Dynex DX-40L150A11 User's Guide Page 12

Comments to this Manuals

Related products and manuals for LED TVs Dynex DX-40L150A11