Dynex DX-800U Specifications download pdf (Page 16)

Appendix - FAQ

If the result displayed is similar to what is shown in this example, your computer has

not connected to your router. If so, refer to the following for a solution.

Is the connection between your computer and your router correct?

The Link/Act LEDs of the LAN port on your router and LEDs on your computer's

network adapter should be lit.

Is the TCP/IP configuration for your computer correct?

If your router's IP address is 192.168.1.1, your computer's IP address must be within

the range of 192.168.1.2 ~ 192.168.1.254, and the gateway must be 192.168.1.1

I’m an ADSL user. How do I configure my router to access the Internet?

To configure your router to access the Internet:

1 Configure the ADSL modem to the RFC1483, or similar, bridge model.

2 Connect the Ethernet cable from your ADSL modem to the WAN port on your router.

The telephone cord plugs into the Line port of the ADSL modem.

3 Log in to your router, click Network on the left of your browser, then click WAN. The

WAN page opens.

4 On the WAN page, select PPPoE for WAN Connection Type. Enter the user name

password, then click Connect. The Internet Connection Mode page opens.

5 If Time-based Connecting is checked, select Connect on Demand or Connect

Manually for Internet connection mode. Type an appropriate number for Max Idle

Time to avoid wasting paid time. Otherwise, you can select Auto-connecting for

Internet connection mode.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 70 71

No comments

Dynex DX-800U Specifications Page 16