Dynex DX-800U Specifications download pdf (Page 8)

Setting up and using your router

•If you chose Static IP, the Static IP settings page opens.

Note: The IP parameters should be provided by your ISP.

Enter the following:

- IP Address—This is the WAN IP address as seen by external users on the Internet

(including your ISP).

- Subnet Mask—The Subnet Mask used for the WAN IP address, and it is usually

255.255.255.0

- Default Gateway—The gateway, if required.

- Primary DNS—The DNS Server IP address, if required.

- Secondary DNS—If your ISP provides another DNS server, enter it into this field.

7 Click Next. The Quick Setup - Finish page opens.

8 After finishing all configurations of basic network parameters, click Finish to complete

the process and exit.

Configuring your router (advanced)

You can access the router settings to configure the advanced functions of your router. There

are ten main menus on the left of the Web-based utility. Submenus are available when you

click one of the main menus. The ten main menus are:

• Status

•Quick Setup

•Network

•DHCP

•Forwarding

•Security

• Static Routing

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 70 71

No comments

Dynex DX-800U Specifications Page 8