Dynex DX-L37-10A Specifications download pdf (Page 10)

Making connections

The remote control may not work if direct sunlight or bright light shines

on the remote sensor. Either move your TV or change the angle at

which you use the remote control.

Programming a universal remote control

to work with your TV

You can operate your TV with a new or existing universal remote

control.

To program a universal remote control:

1 Find the code for your universal remote control by identifying its

model (or your set-top box’s remote control manufacturer and

model) on the charts below, then make note of the numbered

code below it. You will use the numbered code to program your

remote control to work with your TV.

Codes for other remote controls are available online at:

www.dynexproducts.com\t-customer_support.aspx

Tips:

• The brand name is often visible on the front of the universal remote

control, and the model number is often visible on the back.

• If your universal remote control isn’t listed on the chart, refer to your

universal remote control’s instructions and try codes for the brands

Orion, Emerson, Memorex, Sansui, Sylvania, or Zenith. You may need

to try several codes before fi nding a match.

2 Follow your universal remote control’s instructions to enter the

code you found in Step 1.

Tips:

• If your universal remote control has a code search feature, run a code

search to identify a code that matches your TV. See your universal

remote control’s instructions for details.

• If your universal remote control has a “Learn” feature, you can

manually program it using your TV remote to “teach” the commands

one at a time. See your universal remote control’s instructions for

details.

3 If all else fails, you must use a different universal remote control

that can operate both your set-top box and your TV. Five such

remotes are listed on the chart, but many other compatible

models are available in the market.

For more help, call technical support for your universal remote

control or set-top box manufacturer, or call the Dynex Customer

Care Center at 1-800-305-2204.

Making connections

Cautions:

Check the terminals for position and type before making any connections.

Loose connections can result in image or color problems. Make sure that

all connections are tight and secure.

The external audio/video equipment shown in these illustrations may be

different from your equipment. If you have questions, refer to the user

manual that came with your equipment.

Always turn the power off when connecting external equipment.

Connecting the power

To connect the power:

• Connect the power cord (included) to the AC IN jack on the back

of your TV.

Notes:

This illustration is for reference only. The AC plug may be different on your

TV.

Your TV should only be operated from the power source indicated on the

label.

Always unplug the AC power cord from the AC power outlet when you will

not be using your TV for an extended period of time.

Connecting an antenna, cable TV, or

satellite TV box

To connect an antenna, cable TV, or satellite TV box:

1 Connect one end of a 75 ohm cable (not included) to the RF OUT

jack on the antenna or on the cable or satellite TV box.

2 Connect the other end of the cable to the RF jack on the back of

your TV.

Notes:

Use a 75 ohm cable to eliminate interference and noise from radio waves.

Do not bundle the 75 ohm cable with the power cord or other cables.

If the antenna is not installed correctly, contact qualified service personnel

to correct the problem.

Dynex TV codes for universal remote controls

(for all Dynex TVs manufactured after Jan. 1, 2007)

Universal remote control manufacturer and model

Philips

PHDVD5,

PH5DSS,

PMDVR8,

PDVR8

DirectTV

RC23

RCA

RCU807

One for All

URC-6690

Sony

RM-VL600

115 10463 135 0464 8043

Set-top box manufacturer and model

Comcast

M1057

Dish

Network

VIP508,

VIP622

Motorola

DRC800

TIVO

Series 3, HD

0463 720 0463 0091

Antenna, cable TV, or

satellite RF jack

RF jack

Back of TV

RF coaxial cable (75 ohm)

DX-L37-L42-10A_08-1837.book Page 7 Wednesday, January 21, 2009 1:17 PM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments

Dynex DX-L37-10A Specifications Page 10

Comments to this Manuals

Related products and manuals for LED TVs Dynex DX-L37-10A