Dynex DX-PS500W Specifications download pdf (Page 3)

Contents

Dynex ATX Power Supply

Unit DX-PS500W

Contents

Important safety instructions ...........................................................3

Power supply components and features............................................3

Installing the power supply ..............................................................3

Troubleshooting................................................................................3

Specifications....................................................................................3

Legal notices.....................................................................................4

Warranty...........................................................................................5

Français........................................................ 7

Español ...................................................... 11

Important safety instructions

• Do not locate your PC near a radiator or any other heat source

• Do not locate your PC near any source of magnetism

• Do not locate your PC in a moist or dusty area, or any area subject

to excessive vibration

• Do not locate your PC in direct sunlight

• Connect your PC to a source of stable electrical power

Caution:

Check the red power supply voltage switch setting before

installation. The setting should be the same as your local power voltage

(115 V for North America and 230 V for Europe and other countries).

Change the voltage setting if necessary. Failure to take this precaution

could result in damage to your equipment and could void your

warranty.

Power supply components and

features

Power supply features include:

• Complies with Intel ATX 12V version 2.2 and is downward

compatible with V2.0

• Compatible with Intel VIIV and AMD LIVE interfaces

• Supports Intel and AMD dual-core and multi-core processors

• Supports SLI and crossfire graphics cards and is downward

compatible to legacy graphics cards.

• Energy Star compliant

• Internal fan speed control function

• Low Acoustic noise

• Output over-current and over-voltage, and short circuit protection

• 70% min. efficient under full load

Power supply components include:

Installing the power supply

To install the new power supply:

1 Turn off your computer.

2 Unplug the power cord from your computer.

3 Open your computer case. For instructions, see your computer’s

user guide.

4 Disconnect power supply cables from the system board and

peripheral devices, such as hard drives, optical drives, and fans.

Make sure that you note where all the power connectors are

because you will need to reconnect the power supply cables.

5 Remove the old power supply. For instructions, see your

computer’s user guide.

6 Install the new power supply and secure it to the computer case

with the appropriate screws.

7 Reconnect all power supply cables using the notes you made in

step 4. Make sure that each connection is secure.

8 Close the computer case.

9 Plug the power cord into your computer, then turn your computer

on.

Troubleshooting

If your new power supply is not working correctly, try the following:

• Make sure that the computer power cord is firmly plugged into the

power cord connector on your computer.

• If you are using a surge protector, make sure that it is plugged in

and turned on.

• Make sure that the wall outlet is supplying power. For example,

plug a lamp into the outlet and turn it on.

• Make sure that the red voltage switch (located on the back of the

power supply) is set to the correct voltage setting. The setting for

the United States is 115V. The setting for Europe and other

countries is 230 V.

• Make sure that the system board power supply cable is securely

connected to the system board connector (24 pin or 20 pin).

• Make sure that all power supply cables to peripheral devices, such

as hard drives, optical drives, and fans, are securely connected.

Any loose power cable connections may cause the power supply

operate incorrectly.

• The power supply may be overloaded. Unplug any unnecessary

components, such as extra drives, then try again.

• If the power supply is very hot, check the case fans and the power

supply fan. Replace any faulty case fans, then try again.

Specifications

Input

Output cables

3.4 inches

(86.0 mm)

5.9 inches

(150.0 mm)

5.5inches

(140.0 mm)

AC socket

Voltage switch

Power switch

Fan

4.7 inches

12 cm

Voltage USA: 115 Vac

Europe and others: 230 Vac

Frequency 60 Hz-50 Hz

Current 10.0A (max.) at 115Vac/60Hz

5.0 A (max.) at 230 Vac/50 Hz

Parameter Minimum Nominal Maximum Units

Vin (115 VAC) 90 115 132 VRMS

Vin (230 VAC) 180 230 264 VRMS

Vin frequency 47 --- 63 Hz

DX-PS500W.fm Page 3 Monday, January 29, 2007 7:59 AM

1 2 3 4 5 6 7 8 ... 15 16

Comments to this Manuals

No comments

Dynex DX-PS500W Specifications Page 3

Comments to this Manuals

Related products and manuals for Power supply units Dynex DX-PS500W