Dynex DX-32E150A11 User's Guide Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 35
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
26
MaintenanceDX-32E150A11
Remote control
General
Note: If the problem is not solved by using these troubleshooting
instructions, turn off your TV, then turn it on again.
Maintenance
Cleaning
Clean your TV with a soft, dry cloth. If surfaces are extremely
dirty, use a soft cloth dampened with a weak detergent solution.
Use an eyeglass cleaner to clean the screen. Never use alcohol,
paint thinner, or benzine.
Before using a chemically treated cloth, read the instructions that
came with the cloth.
Specifications
Design and specifications are subject to change without notice.
Dimensions and weight are approximate.
The picture has a
few bright or dark
spots.
A few bright or dark spots on an LCD screen
is normal. It does not affect the operation of
this TV.
Good picture, but no
sound.
Make sure that the sound is not muted.
Make sure that the sound mode is set to
Stereo or Mono. For more information, see
“Adjusting sound settings” on page 14.
Audio noise. Make sure that there is no interference with
infrared equipment such as a cordless
telephone or headphones. Move the
infrared equipment away from the TV to
eliminate the noise.
Problem Solution
Remote control
does not work.
Make sure that the power cord is plugged
in.
Make sure that there are no obstructions
between the remote control and the
remote control sensor on the front of the
TV.
Make sure that the batteries are installed
correctly. For more information, see
“Installing remote control batteries” on
page 6.
Replace the batteries. For more
information, see “Installing remote control
batteries” on page 6.
Trouble
programming your
existing universal
remote control.
See instructions and a table of common
codes in “Programming a universal remote
control to work with your TV” on page 7.
Codes are subject to change. For up to date
codes, go to www.dynexproducts.com.
Replace the batteries. For more
information, see “Installing remote control
batteries” on page 6.
Refer to the User Guide that accompanied
your universal remote control and contact
the manufacturer if problems persist
Problem Solution
One or more
channels do not
display.
Make sure that the channels are not blocked.
For more information, see “Setting parental
control levels” on page 19.
Make sure that the channels are not hidden.
For more information, see “Hiding channels”
on page 15.
The channel may have been deleted from the
channel list. You can tune to the channel by
pressing the number buttons or you can add
the channel back to the channel list. For more
information, see “Changing channel settings”
on page 15.
Password is lost. Enter 9999 to access parental controls, then
set a new password. For more information, see
“Setting parental control levels” on page 19.
Problem Solution
Some settings
cannot be
accessed.
If a setting is grayed, the setting is not
available in the current video input mode.
TV cabinet creaks. When the TV is in use, the temperature rises
naturally and may cause the cabinet to
expand or contract which can cause a
creaking noise. This is not a malfunction.
Control buttons
on the TV do not
work.
Disconnect the power cord, wait a few
seconds, then reconnect the power cord and
turn on the TV.
TV type
LCD
TV panel
32-inch TFT LCD
TV system
NTSC-M, ATSC
Channels
VHF: 2 - 13
UHF: 14 - 69
CATV: 1 - 125
CADTV: 1-135
DTV: 2 - 69
Audio multiplex
BTSC system
Audio output
8.4W × 2
Power requirement
AC 120 V, 60 Hz
Power consumption
110 W
Dimensions
(WxHxD with stand)
30.7 x 21.2 x 8.3 inches
(779.8 x 538.5 x 210.8 mm)
Weight
20.7 lbs (9.4 kg)
Input terminals
Composite (AV) video/left and right audio (1)
Component video/left and right audio (1)
HDMI (2)
VGA/audio (1)
Antenna (1)
Output terminals
Headphone jack (1)
DIgital optical audio (1)
Control terminals
Service Port (1)
Problem Solution
DX-32E150A11_10-1312.book Page 26 Monday, December 13, 2010 1:36 PM
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35

Comments to this Manuals

No comments