DX-DTVMFP23TV Wall MountSafety information and specifications . . .2Tools needed. . . . . . . . . . . . . . . . . . . . . . . . . . .3Package contents
10STEP 5 - Determine wall-mount locationNotes: • For more detailed information on determining where to drill your holes, visit our online height-finde
DX-DTVMFP2311STEP 6 - Option 1: Installing on a wood stud wallNote: Any drywall covering the wall must not exceed 5/8" (16 mm).1Locate the studs.
12STEP 6 - Option 2: Installing on a solid concrete or concrete block wallCAUTION: To prevent property damage or personal injury, never drill into mor
DX-DTVMFP2313.You’ll need2.36 in. (60 mm)* Minimum solid concrete thickness: 8 in. (203mm).* Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x
14STEP 7 - Mounting the TV to the wall plate1Place the TV brackets (B and C) into the slotted flanges of the wall plate (A).2Push the bottom of the TV
DX-DTVMFP2315If you ever need to remove the TV from the wall plate1Grasp the TV by the bottom edge, then pull down on the locking cords and pull the b
www.dynexproducts.com 1-800-305-2204 (U.S. and Canada) or 01-800-926-3020 (Mexico)DYNEX is a trademark of Best Buy and its affiliated companies. Regis
2Safety information and specificationsIMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONSCAUTION: Do not use this product for any purpose not expl
DX-DTVMFP233Tools neededYou will need the following tools to assemble your new TV wall mount:ardwarePackage contentsMake sure that you have all the ha
4TV Hardware BagLabel Hardware Qty.E4F4G8H4I4J4K4L4M4 × 12 mm screwM4 × 35 mm screwM4 washerM6/M8 washerUniversal spacersM6 × 12 mm screwM6 × 35 mm sc
DX-DTVMFP235Installation instructionsSTEP 1- Determine whether your TV has a flat back or an irregular or obstructed back1Carefully place your TV face
6STEP 2 - Select screws, washers, and spacers1Select the hardware for your TV (screws, washers, and spacers). Some TVs come with mounting hardware inc
DX-DTVMFP237STEP 3 - Attaching the plastic covers to the wall plate1Fit the plastic covers (D) over the ends of the wall plate (A).2For a flat back TV
8STEP 4 - Option 1: Attaching the mounting hardware to TVs with a flat backNote: If you plan to use a 5° tilt with a larger TV (42”+), we suggest usin
DX-DTVMFP239STEP 4 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs1Place spacers (I) over the screw holes on the
Comments to this Manuals