Dynex DX-DVD2 Specifications download pdf (Page 20)

DX-DVD2

• Disc Menu—Lets you set the preferred menu language as the default when

playing DVD. (If the DVD supports the language).

• Default—Resets to all the manufacturer's original settings for this DVD player

Press OK to perform the reset.

4 Press (Left) to return to the previous menu.

5 Press SETUP to exit the on-screen menus.

Troubleshooting

Check the following guide for the possible causes and solutions for a problem before

contacting the nearest service center or dealer for repairs.

Symptom Solution

No power Make sure that the DVD player is plugged in and that the AC power connection is

secure.

No picture • Make sure that the connection between the DVD player and the TV is secure.

• Make sure that the TV is in good working condition.

No sound • Make sure that the connection between the player and other devices is secure.

• Make sure that the TV and amplifier are in good working condition and setup

correctly.

DVD will not play • Make sure that the disc is correctly inserted.

•Clean the disc.

The remote control does not

work

• Remove obstacles between the remote control and the player.

• Aim the remote control at the sensor on the front panel of the player.

• Check the battery and replace it if necessary.

Picture is distorted • Check the disc for dirt and scratches. Clean or replace the disc.

• Unplug the player, wait ten seconds, then plug it back in and turn it on.

The control buttons on the

player do not work

• Power surges or other electrical phenomena may have disabled the buttons.

• Unplug the player, wait ten seconds, then plug it back in and turn it on.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Dynex DX-DVD2 Specifications Page 20